Posted: Monday, October 27, 2014 4:02 AM Quote
There was no way that I could rotate the fuselage  of my ATEC Zephyr - How to paint her belly?
My spray gun is  an IWATA  W400 WB  with a 17mm connection between the gun and the paint reservoir/pot.
Problem - Need to keep paint level above spray nozzle when painting up side down.
Solution realign/locate reservoir
Need a fitting /adapter that will allow a 45 to 90 degree realignment of reservoir to gun
Found that you can  purchase a 17mm male/female swiveling hydraulic fittings of various angles (you may need a little plumbers tape to fully seal the male side).
Worked very well - some of the best painting I did on the project.